|
Home > Academics > Bachelor of Science in Mechanical Engineering > Degree Curriculum
MECHANICAL ENGINEERING CURRICULUM
Focus Area Electives
Student should select 10 units of elective courses from one of the clusters corresponding to one focus area below. The requirement of minimum Engineering Science (ES) units of 6.5, and minimum engineering design (ED) units of 3.5 must be satisfied. Deviation from these focus areas must be approved by the student’s advisor and the Mechanical Engineering Program Head.
Elective Courses for Machine Design Focus Area
| Courses | Units | ES Units | ED Units | Semester Offered |
|---|
| ENGR 306 Electromechanical Systems | 3 | 2 | 1 | |
| ENGR 308 Computer Methods in Engineering | 3 | 1 | 1 | |
| ENGR 410 Process Control | 3 | 1 | 2 | |
| ENGR 411 Instrument & Process Control Lab | 1 | 0.5 | 0.5 | |
| ENGR 415 Mechatronics | 3 | 2 | 1 | |
| ENGR 416 Mechatronics Lab | 1 | 0.5 | 0.5 | |
| ENGR 428 Applied Stress Analysis | 3 | 2 | 1 | |
| ENGR 432 Finite Element Methods | 3 | 2 | 1 | |
| ENGR 461 Mechanical and Struct. Vibration | 3 | 2.5 | 0.5 | |
| ENGR 828 Advanced Stress Analysis | 3 | 2 | 1 | |
| ENGR 830 Finite Element Methods | 3 | 2 | 1 | |
| ENGR 860 Advanced Engineering Design | 3 | 0 | 3 | |
| ENGR 862 Deform. & Fracture of Material | 3 | 2 | 1 | |
| Minimum Required: | 10 | 6.5 | 3.5 | |
Elective Courses for Robotics and Control Focus Area
| Courses | Units | ES Units | ED Units | Semester Offered |
|---|
| ENGR 306 Electromechanical Systems | 3 | 2 | 1 | |
| ENGR 308 Computer Methods in Engineering | 3 | 1 | 1 | |
| ENGR 410 Process Control | 3 | 1 | 2 | |
| ENGR 411 Instrument & Process Control Lab | 1 | 0.5 | 0.5 | |
| ENGR 415 Mechatronics | 3 | 2 | 1 | |
| ENGR 416 Mechatronics Lab | 1 | 0.5 | 0.5 | |
| Minimum Required: | 10 | 6.5 | 3.5 | |
Elective Courses for Thermal-Fluids Focus Area
| Courses | Units | ES Units | ED Units | Semester Offered |
|---|
| ENGR 306 Electromechanical Systems | 3 | 2 | 1 | |
| ENGR 308 Computer Methods in Engineering | 3 | 2 | 1 | |
| ENGR 432 Finite Element Methods | 3 | 2 | 1 | |
| ENGR 465 Principles of HVAC | 3 | 1 | 2 | |
| ENGR 466 Gas Dyn. & Boundary Layer Flow | 3 | 2 | 1 | |
| ENGR 468 Applied Fluid Mech. & Hydraulics | 3 | 2 | 1 | |
| ENGR 866 Engineering Aspects of Air Poll. | 3 | 2 | 1 | |
| Minimum Required: | 10 | 6.5 | 3.5 | |
Notes about choosing electives in focus areas:
- If a student wishes to count ENGR 699 (Independent Study) as an elective, course content and ES/ED units must be approved by both advisor and Mechanical Engineering Program Head.
- Students with Focus Areas of Robotics and Control and Machine Design must take ENGR 446/447 as Controls requirement.
- Students with Focus Area of Thermal-Fluids must take ENGR 410/411 as Controls requirement.
- ENGR 432 and ENGR 830 are offered on an alternative year basis.
- ENGR 428 and ENGR 828 are offered on an alternative year basis.
- Student must have an overall GPA greater than 2.5 to take graduate (800 level) courses to satisfy electives.
Home > Academics > Bachelor of Science in Mechanical Engineering > Degree Curriculum
Home | Prospective Students | Current Students | Alumni | Faculty / Staff | News
San Francisco State University
School of Engineering
1600 Holloway Avenue, SCI 163
San Francisco, California 94132
Phone (415) 338-1174 Fax (415) 338-0525
|
